REGISTER
Sign-up and get instant access!
Start Now
| AutoSiteOFF | |
| Place my Bid Now ! | |
| Listing Format: | Auction |
| Current bid : | $ 3,500.00 |
| +15% Buyers Premium | |
| Reserve met | |
| Starting bid: | $ 625.00 |
| # of bids: | 6 bid history |
| Closes: | Auction is closed |
| Location: | USA |
| Started: | 07/10/2012 12:30:05 AM |
| Ended: | 07/25/2012 03:15:00 PM |
| Due to your bid on this item at last 10 minutes, end of auction will be extended from this moment, to 10 minutes | |
| Seller: |
seller32
|
Ask the seller a question
(view comments) Mail this auction to a friend! Watch this item! |
|
| Picture |
|
|
|
|
Description
| Details | |
| Machine type | Vertical Machining Center |
| Make | Tree |
| Model | Journeyman 425 |
| Year | 1993 |
| Control | Dynapath 20 Delta |
| Location | USA |
| Term of delivery | Immediately |
| Quotation | ex. site |
|
Technical details |
|
| Table overall size: | 12" x 51" |
| T-Slots: | (3) 5/8" |
| Table travel (X-Axis): | 30" |
| Saddle travel (Y-Axis): | 15" |
| Quill travel (Z-Axis): | 6" |
| Quill diameter: | 4" |
| Knee travel (manual): | 17.7" |
| Throat distance: | 14.8" |
| Spindle gageline to table top: | 3.7" to 21.4" |
| Milling capacity (mild steel): | 7.0 cu. In/min. |
| Drilling capacity (mild steel): | 1 in. diameter |
| Max. work load capacity: | 800 lbs. |
| Spindle taper: | #40 CAT V-Flange |
| Spindle speeds: | 50-3500 rpm |
| Ranges: | Direct Drive |
| Feed rates: | 0.1-100 ipm |
| Positioning accuracy: | +/- .0005"/10" |
| Positioning repatablity: | +/- .00015" |
| Resolution: | .0001" |
| Axis drive (DC Servo Motor): | 1700 lbs. thrust |
| Traverse rate (X-Axis): | 350 ipm |
| Traverse rate (Y & Z-Axis): | 325 ipm |
| Motor: | 5/7.5hp/3/60/230 |
| Weight (approx): | 6000 lbs. |
| Floor area (doors open): | 108" x 108" |
| Floor area (doors closed): | 88.0" x 70" |
| Height: | 86.0" |
| Electrical Supply: | 60HZ, 3-phase, 23 OV |
| POWER REQUIREMENTS | |
| Supply voltage: | 220 (± 10%) |
| Frequency: | 50/60 Hz |
| Phases: | 3 |
| Supply line cable size: | #4 AWG |
| (Incl. ground wire): | 4 cores |
| Amperage requirements: | 80 amp service |
| KVA: | 30 |
| Supressed air supply specifications | |
| Pressure: | 85 PSI at 7 CFM |
|
Equipped With |
|
Flood coolant Power draw bar Hardened & ground box ways RS 232 Port Rigid ram |
This information is subject to errors in technical details.
Terms of payment:
5 working days after receipt of invoice for the auctioned item. By non-payment we will charge the respective 15% buyer's premium.
Ask the seller a question
| Q: | where is this machine located posted by: 309jjd73 7/25/2012 8:32:22 AM |
| A: | WI |
times.
|
|
5/24/2013 9:10:41 AM
312.226.4150 - 1101 W. Monroe St., Suite 1A, Chicago, IL 60607
